| |
| Web Remote Player V.2.0 |
| 2009/12/23 |
|
 |
| Introduction |
Web Remote Player V.2.0 is an IE-based remote application to playback recorded video from remote site with whole new designed user interface. |
|
|
| Installation Procedure |
Follow the steps below to install web remote player V.2.0 related components and connect to DVR site.
- Download and install Web Remote Player V.2.0.
- After installation, open IE browser on the remote site and type IP address to connect the DVR.
- The web page will prompt an Information Bar message, click OK to proceed.
- Click the Information bar on the IE browser and select Install ActiveX Control from drop down menu.
- Click Install button to install ActiveX Control components for Web Remote.
- After installation, interface for Web Remote is ready and connected to target site.
- To use Web Remote Player 2.0, press
 button to pop up an IE browser window for Web Remote Player.
|
|
| Web Remote Player V.2.0 |
| Language |
Release Date |
File Size |
Download |
| English |
2009/11/26 |
3.56 MB |
Program |
|
| |
| NOTE: |
- There are two different players for remote playback. Please click the correct button to playback video. To use Web Remote Player, please refer to Appendix 17 for details.
- Please check the audio device of local DVR site is installed correctly or not if remote playback is failed.
|
|
| |
| Go Back >> |
